Power Control
Enclosed Power Control Centers
Power control centers (PSP models) have been prepackaged to include two 120 Vac grounded convenience outlets as well as a 4 or 10 Amp switch/circuit breaker for controlling the output power. The outlets can be continuously powered or controlled by the switch/circuit breaker (selectable by internal jumper). Auxiliary outputs are provided for convenient panel installations.
| Model # | Description | |
|---|---|---|
| PSPT2RB10 | Enclosed Power Control Cntr 10A Breaker/Switch 120Vac 2 outlets | |
| PSPT2RB4 | Enclosed Power Control Cntr 4A Breaker/Switch 120Vac 2 outlets | |
| PSPW2RB10 | Enclosed Power Control Cntr 10A Breaker/Switch, 120Vac, 2 outlets, wires | |
| PSPW2RB4 | Enclosed Power Control Cntr, 4A Breaker/Switch, 120Vac, 2 outlets, wires |
Track Mount Circuit Breaker Switches
Track mount circuit breaker switches provide a convenient addition to control panels, allowing a circuit to be switched and overload protected. Circuits can be low voltage (24 Vac) or line voltage (120 Vac).
| Model # | Description | |
|---|---|---|
| PSMN01SB10 | Power Supply accessory, 120Vac 10 Amp Circuit Breaker with LED Indicator | |
| PSMN01SB4 | Power Supply accessory, 120Vac 4 Amp Circuit Breaker with LED Indicator | |
| PSMN24SB10 | Power Supply accessory 24Vac 10 Amp Circuit Breaker with LED Indicator | |
| PSMN24SB4 | Power Supply accessory 24Vac 4 Amp Circuit Breaker with LED Indicator |
Prepackaged Switches
Our power control units (SIB models) utilize the Functional Devices standard configurations to provide simple switching schemes. The product labels can be ordered with custom content to fit your project.
| Model # | Description | |
|---|---|---|
| PSMS1 | 4.00" Track Mount Override Switch 24Vac with LED Indicators | |
| SIB02S | Enclosed Switch 20Amp maintained 3 position center off 3 wire | |
| SIB04S | Enclosed Switch 20Amp maintained 2 position 3 wire | |
| SIB05S | Enclosed Switch 20Amp maintained 2 position 2 wire | |
| SIBLS | Enclosed Switch 30Vac/dc Max maintained 3 position center off W/LED |
UPS Interface
Functional Devices provides a 550 VA commercial UPS along with an enclosure and in interface board which allows the installer to hardwire line voltage to the provided UPS while giving the ability to hardwire the UPS to the final load. this makes for a much cleaner and neater use of a UPS, keeping the equipment off the floor and cords neatly tucked inside the enclosure. An extra 120 Vac outlet is provided along with a 10 Amp circuit breaker on/off switch (which can be used to test the functionality of the UPS). The switch controls the line voltage.
| Model # | Description | |
|---|---|---|
| PSH2C2RB10 | Enclosed UPS Interface board | |
| PSH2RB10 | Enclosed UPS Interface board | |
| PSH550-UPS | Enclosed UPS Interface board w/ 550VA UPS | |
| PSH550-UPS-STAT | Enclosed UPS Interface board w/550VA UPS and status | |
| PSM2RB10 | UPS Interface Board 10A Breaker/Switch 120Vac 2 outlets; power cord | |
| PSMN2C2RB10 | UPS Interface Board w/status 10A Breaker/Switch 120Vac 2 outlets; power cord |
