Functional Devices introduces the new Ethernet RIB® Relay
September 20th, 2011
Functional Devices has released an exciting NEW Ethernet RIB® relay to join the rest of the quality, American-made RIB® line of products. The hot new item, the RIBTW2401B-ET, will provide the ability to switch and receive status of various loads up to 20 amp through an Ethernet network.
This technology allows you to access the RIB® via laptop or smartphone with its own browser, or can be controlled by a DDC controller. As are all RIB® products, the RIBTW2401B-ET is designed and manufactured right here in the United States.
Features of the new product include:
- XML and HTTP GET commands; allows you to interface with DDC controller
- One discrete 20 amp output + override
- One digital input
- Serves its own webpage for setup and control
- Static IP addressable
- Unique MAC address built in
- UL Listed
- As always, built and manufactured in the United States
Functional Devices introduces newest member of the BACnet family!
September 20th, 2011
Add an extra 12 I/O with one point on your network!
Functional Devices is excited to offer its newest member of the BACnet® family of products. The RIBMNWD12-BCDI has just been released and orders are now being accepted. This new item is a must have if you´re looking for the convenience of simple status on your network without adding an additional controller to expand I/O.
Here are a few more details:
- MSTP network device
- 24 Vac/dc input
- No need to add an extra controller for simple status on the network.
- Provides 12 isolated digital or dry contact inputs for feedback onto the network
- Full wave rectified
Coming Soon!
[RIBMNWD12-BC]
Same as above plus 2 of the 12 inputs can be used as accumulator inputs for power monitoring applications.
The RIB® Latching Relay is here!
September 20th, 2011
Functional Devices is pleased to announce our new latching relay series, prepackaged in an easy-to-use, convenient form! These relays are activated by pulse commands from a controller.
This series of relays comes prepackaged in their own NEMA I plastic enclosure with a ½ inch mounting nipple, LED indicator and pre-wired for a money-saving installation that is easy and quick.
The relay contacts are mechanically latched in the closed position and the load will remain on in the event of a control panel failure providing light where needed during the failure period. If power is completely lost the contacts will remain in their last state and the load will activate upon the return of normal power or emergency power.
Product Features:
- Available with status LED and auxiliary output for status control
- True override switch
- UL listed
- Energy efficient [No coil draw when relay is active]
- Meets “Buy American” qualifications
Be sure to bookmark our website or follow us on Twitter @RIB for product updates!
